ThinkServer Rack Mounted

[#1]

Hello, sorry for my bad english.

i vant to install Hyper-v on my Lenovo RD120.

Wen i starting my virtual machine i'v got an error :

The virtual machine could not be started because the hypervisor is not running.  The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer.  (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on.  Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically.  

Sources Hyper-V-Worker

EventID 3112

I need to configure my bios option :

- Processor Execute Disable Bit is Enabled

- Intel Virtualization Technology is Enabled

the second is ok, but i don't find the first option ??

who could help me ??

thanks

Jean Marc

[#2]

For Intel Virtualization,  here's a free tool securable that will show you what your system is capable of running, Intel has a good site listing the various processor models and which ones supply Intel VT and Disable Bit.

[#3]

welcome to the forum!

what OS are you using?   if it's server 2008 64-bit, do you have the hyper-v role installed?

[#4]

The Virtualization and DEP settings are in the BIOS.