Reply
New Member
mingzheyi
Posts: 1
Registered: 08-18-2009
Location: Boston, MA
0

X301 won't start after BIOS update

Hi all:

 

Well I've had my new x301 for about 2 months and it's given me nothing but troubles....Recently I found out my laptop won't come back on from hibernation (when you close the screen and open it up). So I downloaded and installed the lastest updates from Lenovo (including the recent BIOS update), restart computer, only to find out it doesn't start up anymore...black screen, thinkadvantage blue botton doesn't light up, no harddrive activity, only light on is battery and power...

 

I'm thinking maybe something went wrong with the BIOS update. Is there anything I can do to fix it (besides shipping this thing to a repair center which is a big hassle, or paying $200 for an on-site tech that might or might not solve the problem).

 

Any help is appreciated.

Active Member
DangerMouse
Posts: 75
Registered: 05-06-2009
Location: London, UK
0

Re: X301 won't start after BIOS update

[ Edited ]

Are you sure you installed the BIOS update, it would prompt you to continue with it, it wouldn't auto install it.

 

My X301 suffered the same symptoms you described with the unit not turning on and those lights, try taking the memory out, reseating it, and then turning it on again, let me know if the laptop then boots.

 

Mine is currently in for a new system board, for the fault you just described, but it wasn't down to a BIOS upgrade, the unit was just like that from new.

 

Anyway as I said, take the panel off underneath, take the memory out, and reseat it, and then screw it back together and turn it back on, see if that lets it boot, and do report back here with your findings, as I'd be very interested to hear the outcome.

 

Cheers

Active Member
aadj
Posts: 5
Registered: 10-31-2009
Location: Netherlands
0

Re: X301 won't start after BIOS update

i have the same problem 

 

i have a   x301 (model) 2776 with Windows 7

 

after upgrading the system. it seemed that the system hanged. But after 10 minutes  it starts.

 

every time that the system boots up it takes 10 minutes tot start Windows. It does not matter if i start the computer with priority order DVD of HDD.

 

Did you had the same promem?

 

aadj

 

tps
New Member
tps
Posts: 1
Registered: 11-10-2009
Location: Denmark
0

Re: X301 won't start after BIOS update

My T500 did the same thing after a bios update. Everytime the laptop restarted i took like 10 mins.

 

I solved this problem by taking the internal battery out of the laptop, and put it back in again.

 

Now my T500 start up without any problems :smileyhappy:

New Member
calippso
Posts: 1
Registered: 11-18-2009
Location: Switzerland
0

Re: X301 won't start after BIOS update

i agree my T400 did the same thing after a bios update (Windows 7). Everytime the laptop restarted it took about 10 minutes.

 

to solve the problem remove the internal battery and put it back.

 

 

greets!

Active Member
jimmyw
Posts: 6
Registered: 08-03-2009
Location: USA
0

Re: X301 won't start after BIOS update

Did you X301 owners solve the issue?  I'm debating whether I should apply this 3.07 BIOS update...

Active Member
aadj
Posts: 5
Registered: 10-31-2009
Location: Netherlands
0

Re: X301 won't start after BIOS update

Finally i swiched off the intel security options in the bios setup. After that it starts up quickly.

Right now the performance is impressive.

 

AadJ